Matrix Setu ATA211G User Manual

Hearty Welcome!

ATA211G Port ConfigurationResourcesCapacity FXS Port1Mobile Port1Ethernet Port 2 (1 – LAN & 1 – WAN)Antenna Connector1LED’s5

• Current date & current time display• Different internet time server selection1. Ntp1.cs.wisc.edu2. Time.windows.com3. Time.nist.gov • Selection

Displays Current Date & Time Select Time Server from the list or Enter the IP Address/ Domain name of any another Time Server Select appropriate

• ANT: Automatic Number Translation• Translates Number Dialed by the User with the Substitute Number String given in the table • ATA Supports 24 ANT T

Enter Indices for dialed number & substitute number string ANT

Select Yes to Apply ANT. Select the Table number for Dialed Number String & Substitute Number String for SIP TrunkANT

Select Yes to Apply ANT. Select the Table number for Dialed Number String & Substitute Number String for Mobile PortANT

• DST is the time during which clocks are set one hour or more ahead of Standard Time to Provide more daylight at the end of the Working Day• In Many

• Types:1. None2. Day – Month Wise (i.e.1stSunday of March)3. Date – Month Wise (i.e. 23rd April )• Settings: 1. Forward Time Adjustments2. Backward T

Select type 1. None2.Day – Month Wise3.Date – Month WiseDaylight Saving Time Adjustments

• Similar to “Memory Dialing” feature of PBX• Programmable Parameters:1. Name of the Contact 2. Number of the Contact 3. Destination Route• Access Co

LED Indication

• Dialed from FXS• Incoming from Mobile• Incoming from SIPSpeed Dialing

• SLT Off – hook • Dial Tone• #9 – 01 (Access Code for Speed Dialing)• Outgoing through Mobile or SIP trunkSpeed Dialing – FXS Port

Define the Number for OG Call in the index & define the route by which the destination number will be dialed Speed Dialing – FXS Port

• Incoming Call from Mobile• Dial Tone• #9 – 01 (Access Code for Speed Dialing)• Outgoing through SIP trunkSpeed Dialing – Mobile Port

Define the number & Destination route for the particular Index Speed Dialing – Mobile Port

• Incoming Call from SIP• Dial Tone• #9 – 01 (Access Code for Speed Dialing)• Outgoing through MobileSpeed Dialing – SIP Port

Define the number & Destination route for the particular Index Speed Dialing – SIP Port

• System Name • Language Selection• CPTG & Rings• Routing Tone• First Digit Wait Timer• Inter Digit Wait TimerSystem Parameter

• Call Release Timer• VoIP Silence Disconnect Timer• Transfer Notification Timer• RCOC Record Delete Timer• Forward Error Correction• Voice Activity D

Define the System Name here i.e. Customer Name System Parameter

Antenna Ports SIM Card HolderSIP 2SIP 1GSMFXSPOWER ATA211G LED Indication

Select the Language for Admin & User1. English2. Italian3. Spanish4. French5. German6. PortugueseSystem Parameter

Define the CPTG & Rings according to the country type System Parameter

Select the flag accordingly to Play routing tone during call Progress or not System Parameter

It is the Timer in Seconds for which system waits for the user to dial the first digit of number after going Off-HookSystem Parameter

It is the Timer in Seconds and can be defined as a time between two digitsSystem Parameter

It is the Timer in minutes after which you want the system to disconnect the call, when the remote user goes ON-hookSystem Parameter

It is the Timer in minutes after which the call made/received on IP gets disconnected if silence(No Voice packets) is detectedSystem Parameter

It is the Time for which ATA will wait for the call transfer notification from the remote peer System Parameter

• RCOC: Return Call to Originate Caller• Makes easy to reach originate caller instead of landing according to the programming• 3 types of RCOC support

It is the timer after which entry formed in the RCOC table will be deletedClick here to clear the RCOC tableSystem Parameter

LEDRelated Indication1Power2FXS3GSM4SIP 15SIP 2ATA211G LED Indication

Select yes to reduce error & improve voice qualitySystem Parameter

It is used to detect the absence of audio and conserve bandwidth by preventing the transmission of silence packet over networkSystem Parameter

If option is selected as yes than even user can default the admin passwordSystem Parameter

• Some times customer have multiple routers in their network to connect their multiple sites using MPLS (Multiprotocol Label Switching)/ Frame Relay•

Static Routing Table

• Helps in Avoiding Unwanted Calls• Numeric PIN of 4 digits is required• Makes possible to authenticate the caller to prove his identity before the ca

Enter the PIN Number of 4 Digits PIN Authentication

PIN authentication on SIP trunkPIN Authentication

PIN authentication on Mobile trunkPIN Authentication

• Call Forward• Call Waiting• Do Not Disturb (DND) Supplementary Services

LED Indication – FXS Port LEDStatusMeaningFXS ONSpeech & Off-hookBlinks FastError During IC/OG CallBlinks SlowIC Call: Ringing, OG Call: after en

• Call Forward – Unconditional (All Calls)• Call Forward – When Busy (Busy Condition)• Call Forward – No Reply (Call Forward Timer) Call Forward

• Call waiting option notifies you of another Incoming call, when user is busy on a call• User will get beeps during speech when user have a waiting c

• Do Not Disturb option allows user to avoid the incoming calls if user do not want to receive them• Select the required option to enable or disable t

Enable or disable the required Supplementary services from hereSupplementary Services

• Whenever there is any problem related to VoIP in the field, Ethereal Capture is required to know the signaling with the ITSP or other system with wh

• Filter settings are provided for targeting particular IP or port on the network (i.e. port 5060 in the filter setting field will capture packets for

Set the Filter setting parameters here PCAP Trace

• Calls over IP network without the intervention of a proxy server/Registrar server is defined as peer – to – peer calling • The peer – to – peer tab

Enter the number user wants to dial Enter the name of the Destination user Enter the Destination user’s IP address or Domain Name Peer – to – Peer Num

• ATA211G supports a feature by which the Admin can view the system debugs on the Syslog server over IP network • The parameters Syslog Server Address

LEDStatusMeaningMOBILE ONSIM Card is Present & ActiveBlinking (100ms ON & 100ms OFF)SIM Card is Absent or de-activated or SIM PIN is faulty

ATA 211G supports 12 different Debug levelEnable Debug & define the IP address & Port number of Syslog serverDebug

Debug generation on Syslog

LED Indication – SIP1 LEDStatusMeaningSIP1ONSIP1 enable & ATA 211G registered with the SIP Server Blinks Fast SIP1 enable but ATA 211G not registe

LED Indication – SIP2 LEDStatusMeaningSIP2ONSIP2 enable & ATA 211G registered with the SIP Server Blinks Fast SIP2 enable but ATA 211G not registe

ADAPTER 12V 1.25AMP INADAPTER 12V 1.25AMP AU ADAPTER 12V 1.25AMP USPower Adapter

Programming

• Technical Training• SETu ata211g••

• Built-in Web Server• GUI Based Software Called JEEVES• Accessible Using Any Web Browser• 2 Login Mode in JEEVES1. Admin Login2. User LoginProgrammin

• Default IP Address of LAN Port: 192.168.2.21• Default IP Address of WAN Port: 192.168.1.196• Default Admin Password: 1234 • Default User Password: 1

Click here for User LoginDefault IP of SETU ATA 211GClick here for Admin LoginProgramming

Enter Admin Password (Default: 1234)Programming

JEEVES Home Page – Admin

Enter User Password (Default: 1234)Programming

JEEVES Home Page - User

Applications

• Residential Application• SOHO Application• Business Application• Peer to Peer ApplicationApplications

IP NetworkGSM NetworkATA 211GComputer Router/ Broadband ModemProxyAnalogPhoneBackResidential Applications

• SETU ATA211G – Introduction • SETU ATA211G – Hardware Architecture• SETU ATA211G – LED Indication• SETU ATA211G – Programming• SETU ATA211G – Applic

IP NetworkGSM NetworkATA 211GComputer ProxyAnalogPhoneRouter/ Broadband ModemBackSOHO Applications

IP NetworkGSM NetworkATA 211GRouterProxyAnalogPhoneSwitchBackBusiness Applications

IP NetworkWAN WANWAN WANLANLANLANLANFXSFXSFXSFXSRouter RouterRouterRouterLocation ALocation BLocation CLocation DBackPeer to Peer Applications

Network Parameters

Network Parameters• LAN Port• WAN Port• Status

Enter LAN IP Address Enter LAN Subnet MaskLAN Port MAC AddressLAN Port

WAN Port• Connection Type • MAC Address Cloning• 100rel/PRACK• SIP Timers • SIP Over TCP • UDP NAT Keep Alive

WAN Port• TCP NAT Keep Alive• STUN• Router’s Public IP Address• VLAN/COS• QoS• SIP/RTP Port

Connection Type• Static• DHCP• PPPoE

WAN Port - StaticEnter WAN Port IP Details i.e. IP Address, Subnet Mask, Gateway, DNS Address hereBack

Introduction

WAN Port – DHCP Enable DHCP if the connection type provided by SP or Network is DHCPSelect DNS Server as obtain Automatically in Case of DHCPBack

WAN Port – PPPoE If the Selected Internet Connection Type is „PPPoE‟, Program the User ID, Password and PPPoE Service Name hereBack

MAC Cloning• MAC cloning means to configure new MAC address [MAC-2] for the host without changing existing MAC address [MAC-1]• After doing MAC clonin

ISPMAC:- 01:1d:1a:02:82:34Cloned MAC:- 01:1d:1a:02:82:34Fix MAC:- 02:2d:1c:02:32:45ISP Is Authenticating Host With MAC AddressMAC Cloning

SIP Timers• SIP Invite Timer• SIP Provisional Timer• General Request Timer

SIP Timers1. SIP Invite Timer:- It is the time for which ATA211G waits for a response from the called party after sending INVITE message - This time s

SIP Timers2. SIP Provisional Timer:- It is the time for which ATA211G waits for final response after receiving provisional response from the called

SIP Timers3. General Request Timer:- It is the time for which ATA211G waits for the response of a transaction request - This timer starts on initia

SIP Over TCP• The SIP over TCP option allows you tosend/receive the SIP messages over TCP • SIP over TCP is applicable for both Proxy and Peer-to-Pee

UDP NAT Keep Alive• The UDP NAT Keep Alive option allows you to specify whether to send or not the SIP messages to refresh the UDP binding made in NAT

• VoIP Analog Telephone adaptor• SIP – FXS – Mobile Gateway• Protocol Used for VoIP Calling: SIP• Simultaneous Internet Browsing & VoIP CallingInt

TCP NAT Keep Alive• The TCP NAT Keep Alive option allows you to enable or disable the NAT keep alive mechanism for TCP connection• When ATA is connect

STUN• Simple Traversal of UDP through NATs• UDP (User Datagram Protocol) is a Network Protocol for Transmission of Data• STUN allows VoIP Card to work

STUN• Server reports back to the STUN client with Public IP address used by the Router along with open port information by the NAT to all incoming tra

Status• LAN Port• WAN Port

Status of LAN Port’s Current IP Address & MAC Address Status – LAN Port

Status of WAN Port IP Details, MAC Address & NAT Type of Router Status – WAN Port

Incoming Call Management• Mobile Trunk• SIP Trunk

Mobile Trunk

• Route to FXS• Route to Fixed Destination Number• Route to FXS for ring timer & then route to fix destination number after ring timer expiry• Ans

• Incoming call on the mobile port• Landing on FXS• Rings till ring timer• Call will be rejected after ring timerMobile Trunk

Hardware Architecture

ATA 211GAnalogPhoneFXSCaller9662043785BackMobile Trunk

• Incoming call on the mobile port• Call is routed to “Fixed Destination number” using the trunk defined in the Incoming call route option Mobile Trun

ATA [email protected] Destination Number: 201BackMobile Trunk

• Incoming call on the mobile port• Landing on FXS• Rings till ring timer• Expiry of ring timer• Call is routed to “Fixed Destination number” using th

ATA 211GAnalogPhoneFXSCaller9662043785201@matrix-pbx.dynalias.orgSIPBackMobile Trunk

• Incoming call on the mobile port• Dial Tone• Number dialed by the caller• Expiry of ring timer• Call is routed according to the defined “Incoming Ca

ATA [email protected] ToneBackMobile Trunk

• Incoming call on the mobile port• Landing on FXS• Rings till ring timer• Expiry of ring timer• Dial Tone• Number Dialed by the Caller • Call is rout

ATA 211GAnalogPhoneFXSCaller9662043785201@matrix-pbx.dynalias.orgSIPDial Tone MobileBackMobile Trunk

SIP Trunk

SETU ATA211G

• Route to FXS• Route to Fixed Destination Number• Route to FXS for Ring Timer & then route to fix destination number after ring timer expiry• Col

• Incoming call on the SIP trunk• Landing on FXS• Rings till ring timer• Call will be rejected after ring timerSIP Trunk

ATA 211GAnalogPhoneFXS [email protected] Trunk

• Incoming call on the SIP trunk• Call is routed to “Fixed Destination number” using the trunk defined in the Incoming call route option SIP Trunk

ATA 211GCaller: [email protected] Destination Number: 96620437859662043785MobileSIPBackSIP Trunk

• Incoming call on the SIP trunk• Landing on FXS• Rings till ring timer• Expiry of ring timer• Call is routed to “Fixed Destination number” using the

ATA 211GAnalogPhoneFXSCaller: [email protected] Destination Number: 9662043785SIPBackSIP Trunk

• Incoming call on the SIP trunk• Dial Tone• Number dialed by the caller• Call is routed to the “Mobile Port”SIP Trunk

ATA 211GAnalogPhoneFXSCaller: [email protected] Tone SIPBackSIP Trunk

• Incoming call on the SIP trunk• ATA refers Called Party Number Table • Number is dialed according to the Called party number tableSIP Trunk

Input SupplyWAN PortLAN PortFXS PortGSM Engine Antenna Connector SETU ATA211G

ATA 211GAnalogPhoneFXSCaller9974562683MobileSIP9974562683NumberDestination Route9974562683Mobile202FXSMobile9974562683BackSIP Trunk

• When ATA211G connects to the IP network and customer starts ATA, it’s the auto configuration feature which enables ATA to get automatically configur

• Feature is used for ITSP’s, who can generate & store the configuration files of each ATA 211G from a centralized location• Auto – Configuration

• Six When options available for Auto Configuration1. Never2. At Each Power ON3. At Next Power ON4. Resync periodically5. At Each Power ON & Resy

Define the server address & folder path where the configuration file of ATA is stored Auto Configuration

• System Name• Mobile Port• SIP Trunk1• SIP Trunk2• SIP Trunk3Status

System Name, System Version –Revision, kernel Date details Status – System Name

Details of current IP address, Subnet Mask & MAC address of LAN PortStatus – LAN Port

WAN Port status: IP Details, NAT type, MAC Address etc. Status – WAN Port

Status of Mobile Port: IMEI Number, Network operator code, network Operator Name, signal strength etc.Status – Mobile Port

FXS PortInput SupplyWAN PortLAN PortATA211G Port Configuration

Status of SIP trunk whether it is Registered or notStatus – SIP Trunks

Soft Restart

• Total 5 Emergency Numbers can be Programmed• Each Emergency Number is of Maximum 3 Digits• Perfect Match Logic is used for Matching• Emergency Numbe

Mobile Emergency NumbersEmergency Numbers

• Reset the system to Factory Set Parameters• ATA Supports following Methods to Default1. Default the System through Web JEEVES2. Default the System U

Factory Default

• Password must be of maximum 4 digits• Password must consist of digits: 0 to 9 • Dial „#***‟ to default Admin Password in case Admin forgets the Pass

Enter Old PasswordEnter New Password twice Admin Password

• Password must be of maximum 4 digits• Password must consist of digits: 0 to 9 • Dial „#***‟ to default User PasswordUser Password

Enter Old PasswordEnter New Password twice User Password