Matrix U7xi Service Manual download pdf (Page 8)

CHAPTER 3: PREVENTATIVE MAINTENANCE

3.1 RECOMMENDED CLEANING TIPS

DO NOT use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Matrix Fitness Systems.

MAINTAIN LABELS AND NAMEPLATES. Do not remove labels for any reason. They contain important information. If unreadable or missing,

contact Matrix Fitness Systems for a replacement. 1-866-693-4863, www.matrixfitness.com

MAINTAIN ALL EQUIPMENT Preventative maintenance is the key to smooth operating equipment. Equipment needs to be inspected at regular

intervals. Defective components must be replaced immediately. Improperly working equipment must be kept out of use until it is repaired.

Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Matrix Fitness Systems will

provide service and maintenance training at our corporate facility upon request or in the field if proper arrangements are made.

3.2 CHECK FOR DAMAGED PARTS

In order to maximize life span, and minimize down time, all Matrix Fitness Equipment requires regularly

scheduled cleaning.

YOU WILL NEED:

- Mild dish soap and water mixture in a spray bottle (10:1 water to soap ratio).

- Lint free 100% cotton cleaning cloths or Microfiber cleaning cloths.

- Vacuum / Shop Vac with extendable hose and soft brush attachment.

- Corrosion Block (available from Matrix - part # ZMS4001374).

DAILY:

1. Wipe down the unit after each use with a mild dish soap and water mixture. NOTE: Spray the soap / water mixture onto the cloth.

NEVER spray directly onto the equipment. We recommend that you do NOT allow customers to use spray bottles to clean the equipment. If

the cleaner is sprayed directly on the equipment or overspray is present, it may cause your equipment to rust and / or cause damage to con

sole overlays.

WEEKLY:

1. With a clean dry 100% lint free cloth and water / soap mixture, wipe down the entire frame so it is free of dust, dirt, and sweat.

2. With a clean dry 100% lint free cloth and water / soap mixture, wipe down the entire console area including the hand grips and hand rails.

3. Use a computer screen cleaner or LCD / LED screen cleaner on the touch portion of the console (see Section 3.4).

MONTHLY:

1. Vacuum under and around the Bike. If you need to move it, unplug the unit first.

2. Remove the shrouds and use a vacuum to remove any dust or dirt built up under the covers. NOTE: Be careful not to damage or unplug

any of the wiring.

3. Apply Corrosion Block to the metal part of the iPod cable.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 131 132

No comments

Matrix U7xi Service Manual Page 8