Matrix T7x Owner's Manual download pdf (Page 18)

RECOMMENDED CLEANING TIPS

A Use a soft, clean cotton cloth. DO NOT use paper towels to

clean surfaces on the treadmill. Paper towels are abrasive

and can damage surfaces.

B Use a mild soap and damp cloth. DO NOT use ammonia

based cleaner. This will cause discoloring of the aluminum

and plastics it comes into contact with.

C Do not pour water or cleaning solutions on any surface. This

could cause electrocution.

D Wipe the console and side rails after every use.

E Brush away any wax deposits from the deck and belt area.

This is a common occurrence until the wax is worked into the

belt material.

F Be sure to remove any obstructions from the path of the

elevation wheels including power cords.

G Monthly, unplug the treadmill and remove the motor cover.

Check for debris and clean with a dry cloth or small vacuum

nozzle.

H For cleaning 7xe displays, use distilled water in an atomizer

spray bottle. Spray distilled water onto soft, clean, dry cloth

and wipe display until clean and dry. For very dirty displays,

adding vinegar is recommended.

WARNING: Do not plug the treadmill in until the motor

cover has been reinstalled.

CAUTION: Be sure to have proper assistance to install and

move the unit in order to avoid injury or damage to the treadmill.

DECK AND BELT REPLACEMENT

One of the most common wear and tear items on a treadmill is

the deck and belt combination. If these two items are not properly

maintained they can cause damage to other components. This

product has been provided with the most advanced maintenance

free lubricating system on the market. The Matrix Ultimate Deck™

does not require any maintenance, other than cleaning and belt

tightening, for up to 25,000 miles.

WARNING: Do not run the treadmill while cleaning the belt and

deck. This can cause serious injury and can damage the machine.

Maintain the belt and deck by wiping the sides of the belt and

deck with a clean cloth. The user can also wipe under the belt 2

inches on both sides removing any dust or debris.

The deck can be flipped and reinstalled or replaced by an

authorized service technician. Please contact Matrix Fitness

Systems for more information.

To remove power from the treadmill, the power cord must

be disconnected from the wall outlet.

WARNING

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 53 54

Comments to this Manuals

No comments

Matrix T7x Owner's Manual Page 18

Comments to this Manuals

Related products and manuals for Treadmills Matrix T7x