Matrix T7x Owner's Manual download pdf (Page 26)

ASSEMBLY STEP 1

A Cut the yellow banding straps and lift the running

deck upward to remove all contents from underneath

the running deck.

B Open hardware bag 1.

C Slide main frame boot up console mast.

Place right console mast over main frame

bracket.

D Pull lead wire through right console mast.

After pulling the lead wire through the mast, the

top of the console cable should be located at

the top of the mast. Detach and discard lead wire.

NOTE: Do not pinch console cable when

placing the mast onto the main frame bracket.

E Attach console mast to main frame

bracket using 3 bolts (a), 3 spring

washers (b) and 3 arc washers (c).

F Slide main frame boot down over main frame

bracket.

G Repeat steps D–F on other side.

NOTE: Do not tighten bolts until step 3 is complete.

STEP 1

STEP 2

Z51

Z50

Z52

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 53 54

No comments

Matrix T7x Owner's Manual Page 26