Matrix U7xe Service Manual download pdf (Page 52)

9.5 CONSOLE KEYPAD / OVERLAY REPLACEMENT - CONTINUED

FIGURE E FIGURE F

FIGURE G FIGURE H

8) Press down on the corners of the overlay / keypad to keep it in place. Then remove the protective film (Figure G).

9) Once the overlay / keypad is in the correct position, press down on it to adhere it in positions (Figure H).

10) Use the same procedure to replace any additional faulty overlays / keypads. NOTE: Overlays / keypads cannot be re-used.

11) Test the bike for function as outlined in Section 9.20.

6) Push the overlay / keypad ribbon cable through the hole in the console and plug it in (Figure E).

7) Match the overlay / keypad to the cutout in the console (Figure F).

CHAPTER 9: PART REPLACEMENT GUIDE

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 86 87

No comments

Matrix U7xe Service Manual Page 52