Matrix A7xe Service Manual download pdf (Page 7)

2.2 ELECTRICAL REQUIREMENTS

MATRIX DEDICATED CIRCUIT/ELECTRICAL REQUIREMENT INFO

All Matrix Ascent Trainers require the use of a 15 amp or 20 amp “dedicated circuit,” with a non-looped (isolated) neutral/ground, for the power

requirement. Quite simply this means that each outlet you plug Ascent Trainers into should not have anything else running on that same circuit

besides other Ascent Trainers (up to 3 per 15 amp circuit and 4 per 20 amp circuit). The easiest way to verify this is to locate the main circuit

breaker box, and turn off the breaker(s) one at a time. Once a breaker has been turned off, the only thing that should not have power to it are

the Ascent Trainers in question. No lamps, vending machines, fans, sound systems, or any other item should lose power when you perform this

test.

Non-looped (isolated) neutral/grounding means that each circuit must have an individual neutral/ground connection coming from it, and terminating

at an approved earth ground. You cannot “jumper” a single neutral/ground from one circuit to the next.

In addition to the dedicated circuit requirement, the proper gauge wire must be used from the circuit breaker box, to each outlet that will have the

maximum number of units running off of it. If the distance from the circuit breaker box, to each outlet, is 100 ft or less, then 12 gauge wire may be

used. For any distance greater than 100 ft from the circuit breaker box to the outlet, 10 gauge wire must be used.

For your safety and Ascent Trainer performance, the ground on this circuit must be non-looped. Please refer to NEC article 210-21 and 210-23. Your

Ascent Trainer is provided with a power cord with a plug listed below and requires the listed outlet. Any alterations of this power cord could void

all warranties for this product. Multiple Ascent Trainers can be powered on one dedicated circuit. (3 units per 15 Amp and 4 units per 20 Amp

dedicated circuit.)

GROUNDING INSTRUCTIONS:

The Matrix Ascent Trainer must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric

current to reduce the risk of electric shock. The Ascent Trainer is equipped with a cord having an equipment grounding conductor and a

grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes

and ordinances. If the user does not follow these grounding instructions, the user could void the Matrix limited warranty.

DANGER: Improper connection of the equipment grounding conductor can result in the risk of electric shock. Check with a qualified electrician

if the user is in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet,

have a proper outlet installed by an electrician

CONSOLE POWER

The Matrix Ascent Trainer console has a battery that makes it self powered. This means that even if the unit is not plugged in, the console

may still have power for up to 12 hours. If the console power needs to be reset or turned off, press and hold the CHANNEL UP and CHANNEL

DOWN keys for 3-5 seconds until the console turns off. The console power will also need to be reset if settings are changed in Manager,

Engineering, or Service Modes.

CHAPTER 2: IMPORTANT SAFETY INSTRUCTIONS

The Matrix Ascent Trainer can now be self powered, but it recommended that the 7xe version of the Ascent Trainer be plugged in. If the A7xe

is left in self powered mode, it will take approximately 30 seconds for the screen to load prior to every workout. It is recommended that the unit

be plugged in for at least 4 hours after initial installation to charge the battery prior to using the self powered feature. NOTE: If an add on TV

(using a bracket) or Virtual Active is added to the unit, it must be plugged in, or the TV or VA will not operate correctly. If the Ascent Trainer will

be plugged in, follow the requirements below.

1 2 3 4 5 6 7 8 9 10 11 12 ... 91 92

Comments to this Manuals

No comments

Matrix A7xe Service Manual Page 7

Comments to this Manuals

Related products and manuals for Spin bikes Matrix A7xe