Matrix U7xe Service Manual download pdf (Page 54)

9.7 CRANK AXLE SET REPLACEMENT

1) Remove the bolt that holds the crank to the drive axle set (Figure A).

2) The crank can be removed (Figure B).

3) Reverse Steps 1-2 to install a new crank axle set. NOTE: Torque the bolt removed in Step 1 to 80 N-m / 800 kgf-cm.

4) Test the bike as outlined in Section 9.20.

FIGURE A

CHAPTER 9: PART REPLACEMENT GUIDE

FIGURE B

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 86 87

No comments

Matrix U7xe Service Manual Page 54