Matrix U7xe Service Manual download pdf (Page 60)

9.13 LOWER CONTROL BOARD REPLACEMENT

1) Remove the front shrouds as outlined in Section 9.8.

2) Disconnect the 5 wire connections to the lower board (Figure A).

3) Remove the 2 screws holding the lower board to the frame (Figure B), and remove the lower board.

4) Reverse Steps 1-3 to install a new lower board. Figure C shows the connections at the board.

5) Test the bike for function as outlined in Section 9.20.

FIGURE A FIGURE B

FIGURE C

3 Pin Connector from

the Generator

2 Pin Connector

from the Resistor

8 Pin Connector

from the Console

6 Pin Connector from

the DC power source

2 Pin Connector

from the Battery

CHAPTER 9: PART REPLACEMENT GUIDE

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 86 87

No comments

Matrix U7xe Service Manual Page 60