Matrix U7xe Service Manual download pdf (Page 82)

10.5 TV PROGRAMMING INSTRUCTIONS (ID MARKET)

Once the cardio equipment has been installed and proper power and cable wiring is provided, The Television must be programmed to the club's

channels and settings.

Auto Tuning - An auto scan will search for channel signals from the coax cable. It will tune in all channels that provide a signal.

1. Press ENTER, 1, 0, 0, 1, ENTER on the number keypad to enter Manager Mode.

2. Press TV on the display (Figure A).

3. Press SETUP on the display (Figure B). A TV will appear.

4. Press the - key on the number keypad and a Menu will appear on the TV (Figure C). NOTE: Once the Menu is present on the screen, the

following buttons must be pressed quickly, or the Menu will minimize after 5 seconds of no key strokes.

5. Use the VOLUME UP or DOWN keys to move horizontally in the Menu and the CHANNEL UP and DOWN keys to move vertically.

6. Use the VOLUME UP or DOWN keys to scroll the cursor to Channel Mode of the Menu, then press the ENTER key to enter the Auto Tuning

of sub-menu (Figure D).

7. Press the ENTER key to activate the Auto Tuning Mode and the display will show Tune Type / Country. Use the VOLUME UP and DOWN

keys to select Tune Type (DTV, ATV, or DTV+ATV), then press ENTER key to confirm and store setting. NOTE: Choice the Tune Type with

DTV+ATV that’s recommended (Figure E).

8. Use the CHANNEL UP or DOWN keys to select a country, then press ENTER key to confirm and store setting (Figure F). .

FIGURE BFIGURE A

FIGURE FFIGURE E

FIGURE C

FIGURE D

CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE

1 2 ... 77 78 79 80 81 82 83 84 85 86 87

No comments

Matrix U7xe Service Manual Page 82